Winter = a lot of down time

It hasn't been a particularly snowy winter, this year; but, it has been tremendously windy. Gusty.
Other than  a couple very cold days, we haven't even had any real winter coat days. We are currently in the beginnings of another pretty bad wind storm, though.
As I said...tons of wind this year.
This past weekend we had a storm that didn't produce much more than a few hours of rain, but with gusts hitting mph in triple digits at times, I am thrilled to report that the car port is actually still standing.
For now, that is, as this next storm's gusts have started to blow. This one is only expected to produce 55mph gusts, but I don't count any chickens until they've blown out of the nest.

In the meantime, I have wasted yet another winter when I could've been working on indoor projects such as really getting that carb cleaned and getting the sending unit and gaskets on the new gas tank.
I blame the stress of dealing with getting a new roof, finding out that it was not the real cause for the leaky roof, then dealing with getting the chimney rebuilt.
Ah, home ownership sure does know how to make a person feel like they will never get ahead in life. I don't mean that to sound like I am not grateful to have the means to fix our leaky roof, which I know we are lucky to have over our heads, but I do feel like that carrot just gets farther and farther out of my grasp.

But that is just a moment in time, isn't it.
Looking ahead, we still have the fence to fix, now that it has gotten even worse with these wind storms...

OH! and the car, of course.

When I go through the list in my  head, I see myself driving the car by the end of this summer at the latest.
Then when I put lists to paper, it is clear that I am putting a lot of faith in every thing on that list will just be a matter of execution, and move along with no problems or set backs.
And, if the history of this project...hell! the history of the world...has shown us anything, it's that nothing moves along without issue.

However, I do have faith. And with each tasks I've crossed off my list so far, I have gained the confidence to believe that it is possible, even with set backs, that this car could have me sitting behind the wheel and cruising the Cape at least before next winter.

I have not been keeping up here, mostly because I've not done much with the car, and I like to keep this blog devoted to just that; but, also because I've been blogging on a new site where I am making a little bit of cryptocurrency on a platform called Steemit.
Friends of mine told me about it and I figured, what the hell...doesn't cost me anything and if I can make a few cents here and there, it will add up eventually, right?
Anyway, if you're interested in the other bits of nonsense going on this winter, while the car sits waiting, here is the link to my Steemit blog.

And just so you're not subjected to an all text post, here is the last picture I took while 'working' on the car. We had a random day of nearly 60 degrees. I had the day off, but also little motivation since it was at the tail end of my bout with the flu. I have been trying to figure out how to get the filler tank out, so I could put in the new tank properly. Everyone said 'try a gator grip', since they are security screws and I was trying not to spend another chunk of money on another specialized tool for 3 screws. I found a gator grip, promptly went out to get the screws out...and discovered the socket was too wide to fit into the space where the screws sit. That part had not occurred to me, of course.

So...I can get back on ebay and order the $20 socket that I will use for this one task; or, I can try to just shove the tank with the new gasket back onto the filler neck while it is still attached. I will most likely attempt without the tool and if it's just too much work or just won't work, then I'll get back on ebay.
I have a feeling I will be using the hell out of the gator grip, though!

Wondering what my list looks like now?
Torque all rear bolts (axle, etc)
Fill differential
Assemble rear drum brakes and connect all rear lines
Install fuel tank and connect lines (plus close off vent line on sender unit)

Finish sanding, filling, painting drivers side floor
Find nuts for front seat and reinstall

Assemble front disc brakes and attach all front lines
Bleed brakes
Have tires mounted to original rims and balanced as best as possible
Torque all front suspension bolts

...Then all the engine stuff will commence...fingers will be crossed, prayers will be said, animals will be sacrificed (in the form of celebratory burgers, hopefully) and breath will be held...

Just a few more weeks and I'm hoping to have more to report and more pictures to share.

A quick update on progress

My last post was on October 25! It is now November 17...almost Thanksgiving. The weather has definitely turned the corner to colder days. We've had a fair amount of rain over the past few weeks as well. It makes it hard to get motivated to go out into the ramshackle carport to fight with the parts I can't get to budge.
But, I managed to get a few hours in, here and there, during my days off.
The struggle with the distributor went on for several weeks. It resulted in more trips to Home Depot and Harbor Freight than I had hoped, but I finally found the winning combination: brute strength and a mid-sized pry bar.

It was a moment of sheer joy when that thing popped out. I was happy to have been warned that the distributor in my car did not have gears attached...that the end simply looked like a flat-head screwdriver. If I had not known that before removing the part, I would've thought I had broken the end off!

Once that was out of the way, I was able to loosen all the bolts on the intake manifold. I have not taken it out yet, however. I have a list of things I'd like to have done before the snow falls and/or working conditions are less than ideal.
So, even though I'm feeling good about moving forward with the engine, as far as removing parts and cleaning out the gunk, I'll likely be saving that for Spring.
In the meantime, I made the decision to forgo welding the trunk. The hole was fairly large, and definitely a welding job for someone in the know, but I just did not see myself attaining that skill (or equipment) in a timely manner. Instead, I chose to use a resin/fiberglass patch.

I had already done some patching over the small holes with Bondo body filler. It is unfortunate that I didn't think to just go with the fiberglass from the start, but I am hoping the overlapping of fiberglass over filler won't be too problematic.

I still have to get out there to sand and see how it looks, since the day I did it, I ran out of time doing other chores. ugh...life.
With that patch ready to sand, and then the trunk ready to prime (and possibly paint, in the future), I can finally get the new fuel tank in and tie up the fuel lines. With that done, I can finally finish hooking up the new brake lines and finish the front brake conversion and re-assemble the rear drums. The new shocks can go on, all around; and, I can get the tires mounted and ready.
Spring can be all about getting the engine and exhaust squared away and with any luck, it'll be on the road by summer.
Now, I'm not counting my chickens, by any means, but I'm finally at a place where I feel like I'm moving steadily forward.

Still at it...

Wow! My last post was in August! And it's almost November!?
It's not from lack of work...not that I'm 'killing it' with the progress, but I am making more of an effort to actually get out there and work before the weather gets too cold.
Upside, this year, is that I bought a lamp this past spring, which turned out to give off a ton of heat, so working later into the year is not out of the question.
This will be a short post. The past couple months have been a little hectic: in-law visit, vacation, dead fridge...you know...life getting in the way.
Hubby took a trip back to Ohio to see his folks and help a friend move, so I took some extra time off to concentrate on the car...but then the fridge broke and I spent a day fixing that instead. And, I'm not gonna lie...when I have the house to myself I become very unmotivated to do anything more than binge watch my guilty pleasures and get up early and bake.
But anyway, I did spend a day cleaning and sanding the rust in the trunk and getting a little bit of patch work done.

The trunk had so much rust that the jack stand had rusted to the spare. I had to knock it out with a hammer.

Sweep the big bits of rust, vacuum the rest...sand and brush, vacuum again...and on and on....

Removed as much rust as I could and prepared to just spray with filler. It was still sturdy, no give to it, luckily.

I managed to get the valve covers off to expose an unsettling amount of rust. So I spent some time cleaning those as well.

The trouble this time...the thing that has got me frustrated and questioning my sanity...the intake manifold and distributor.
My hope this month was to get the manifolds swapped out (original back in)...but there is one bolt that is inaccessible (as far as my ability) without removing the distributor (which I was really hoping to not have to do).

There is a bolt just behind that red lever that I just can't manage to get to. My hinged wrench kind of gets in there but then I have no leverage to get the power I need to get the bolt loose.

Okay, fine, I give...I'll remove the distributor. Off to the YouTubes I go...'mark this, mark that'...take the cap off...slip it right out...
Um...no...it does not 'slip right out'. In fact, it feels pretty cemented in there.

Not budging at all. Tried a flathead screwdriver to loosen the seal and pry, but again...space is limited there.

I've tried all I can think of and can only guess that the seal is just really tight and maybe I can pry it out with a mini pry bar. Or, worse, is that it's somehow fused/rusted at the gear end, inside the engine. (that thought, of course, makes me want to cry)

With the wind and the rain today, I'm not likely to get out there and work, but somehow, sometime soon I need to figure out a way the get the distributor out...or at least a way to get that hidden manifold bolt out.
Here's hoping my next post is about how I finally figured it out!